BMTQQ - G-N METAL ASSEMBLY PASTE
- MSDS: BMTQQ
- Manufacturer: DOW CORNING CORP
- Product Name: G-N METAL ASSEMBLY PASTE
- National Stock Number: 9150-01-037-9016
Product Identification
Product ID:G-N METAL ASSEMBLY PASTE
MSDS Date:04/25/1990
FSC:9150
NIIN:01-037-9016
MSDS Number: BMTQQ
Responsible Party
MIDLAND, MI 48640
US
Emergency Phone: 517-496-5900
Info Phone: 517-496-5900
Preparer: JACK L.SHENEBERGER
Cage: 5D028
Contractor
Telephone: 502-737-6758
Cage: 6U655
Ingredients
MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS: 8012-95-1
RTECS: PY8030000
Fraction By Weight: 48%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3/10 STEL;9192
MOLYBDENUM DISULFIDE
CAS: 1317-33-5
RTECS: QA4697000
Fraction By Weight: 17%
OSHA PEL 10 MG/M3 TDUST (MO)
ACGIH TLV: 10 MG/M3 (MO); 8990
SILICA GEL
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 1.0%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3 TOTAL DUST
ZINC PROPHOSPHATE
CAS: 7446-26-6
Fraction By Weight: 14%
CALCIUM PHOSPHATE
CAS: 10103-46-5
Fraction By Weight: 13%
ETHYLENE-BIS-STEARAMIDE
CAS: 110-30-5
Fraction By Weight: 3%
TRIALUMINUM PHOSPHATE
CAS: 13530-50-2
Fraction By Weight: 2.0%
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:PROLONGED EXPOSURE MAY CAUSE
IRRITATION.EYES:DIRECT CONTACT MAY CAUSE IRRITATION.INHAL:MAY CAUSE
SLIGHT RESPIRATORY IRRITATION.INGEST:INTENTIONAL INGESTION OF LARGE
QUANTITIES MAY CAUSE DIGESTIVE TRACT DISCOMFORT.
Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS ABOVE 0.1%
WHICH ARE IDENTIFIED AS CARCINOGENS BY NTP,IARC OR OSHA.
Effects of Overexposure:EYES:REDNESS AND SWELLING.
Medical Cond Aggravated by Exposure:PERSONS WITH ALLERGIC CONDITIONS
MAY BE AT INCREASED RISK FROM EXPOSURE.
First Aid
First Aid:EYES:FLUSH WITH WATER.SKIN:WIPE OFF;FLUSH WITH SOAP AND
WATER(WATERLESS CLEANER MAY BE USED).INHAL:NO FIRST AID SHOULD BE
NEEDED.INGEST:NO FIRST AID SHOULD BE NEEDED.
Fire Fighting
Flash Point Method:OC
Flash Point:>250F/121C
Extinguishing Media:WATER FOG, DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:HAZARDOUS SULFUR OXIDES FORM.
Accidental Release
Spill Release Procedures:REMOVE PRODUCT.CLEAN SPILL AREA TO REMOVE
SLIPPERINESS.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:USE REASONABLE CARE IN HANDLING THIS
PRODUCT.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED IN NORMAL SERVICE.
Ventilation:MECHANICAL(GENERAL) RECOMMENDED.
Protective Gloves:AS NEEDED
Eye Protection:SAFETY GLASSES(AS MINIMUM)
Other Protective Equipment:EYE WASH STATION.
Work Hygienic Practices:WASH HANDS BEFORE EATING AND AT END OF SHIFT.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:V7
Vapor Pres:<5
Spec Gravity:1.38
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PASTE;BLACK;VERY LITTLE ODOR.
Percent Volatiles by Volume:<5
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTON.
Stability Condition to Avoid:HIGH HEAT,SORCES OF IGNITION.
Hazardous Decomposition Products:METAL OXIDES,SULFUR OXIDES, SILICON
DIOXIDE, CARBON DIOXIDE, AND TRACES OF INCOMPLETELY BURNED CARBON
PRODCUTS.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE MADE IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS. CONTACT DOW CORNING FOR QUESTIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.